Printing a Configuration Label
Printing a Configuration Label

Printing a Configuration Label

To print out a listing of the printer's current configuration follow these steps:
  1. Turn the printer off. Load the media compartment with journal media (media with no black bars printed on the back).
  2. Press and hold Media Feed.
  3. Press and release Power and keep Media Feed pressed. When printing starts, release Media Feed.
    1
    Printhead Test
    2
    Identifies Printer as a ZQ220 Plus or ZQ120 Plus
    3
    Printer Serial Number
    4
    Firmware Version
    5
    Bluetooth Radio Address
    6
    Flash and RAM memory installed
    7
    Resident Human Readable Fonts Installed
    8
    Files loaded in printer memory (includes pre-scaled or scalable fonts)