Adding a Printer through Zebra Setup Utilities
Adding a Printer through Zebra Setup Utilities

Adding a Printer through Zebra Setup Utilities

If desired, use Zebra Setup Utilities to add printers to Windows using this procedure, after installing the drivers.
  1. If necessary, install the Zebra Setup Utilities program.
    1. Go to zebra.com/setup and download Zebra Setup Utilities for Windows.
    2. Run the
      zsu-xxxxxxx.exe
       file that you downloaded.
    3. Follow the prompts in the InstallAware Wizard.
    4. In the final screen of the wizard, click the checkbox next to
      Run Zebra Setup Utilities now
      , and then click
      Finish
      .
    5. Follow the prompts in the System Prepare Wizard.
  2. If necessary, open the
    Zebra Setup Utilities
     program.
  3. Click
    Install New Printer
    .
    The printer driver wizard displays.
  4. Click
    Next
    .
    You are prompted to select an installation option.
  5. Click
    Install Printer
    .
    You are prompted to select a printer type. The model type is located on top of the printer next to the tear bar, or on the part sticker located underneath the printer.
  6. Click
    Next
    .
    You are notified that the printer is already installed.
  7. Click
    Add new printer
    .
    You are prompted for a printer name, the port to which the printer will be connected, and the language for the printer display. Click
    USB001
    .
  8. Click
    Next
    .
    You are prompted to launch other setup wizards.
  9. Check the desired options, and then click
    Finish
    .
    The printer driver is installed. If you are prompted that other programs might be affected, click the appropriate option to continue.