Scanning with the Integrated Barcode Scanner (XPAD Only)
Scanning with the Integrated Barcode Scanner (XPAD Only)

Scanning with the Integrated Barcode Scanner (XPAD Only)

Use the Barcode Scanner to capture barcode data.
The optional XPAD L10ax scanner is a factory-installed device consisting of a barcode optical image reader and hardware decoder. The SE4107 scanner is built in to the handle of the XPAD L10ax tablet.
Barcode Scanner
XPAD L10ax Barcode Scanner
1
Barcode scanner
  1. On the tablet, open the application software that is going to receive the barcode data and put the active cursor in the appropriate field of that software.
  2. Aim the scanner lens at the barcode.
  3. Press and hold the Barcode Scanning button (1) on top of the handle.
    scanning
  4. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
    Aiming Pattern
    When the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.
    Aiming Pattern - Picklist
    The Data Capture LED light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
  5. Release the scan button.
    The barcode content data appears in the text field.