Use the deflective mirror to expand the field of view (FOV) and access occluded areas.
Required equipment:
Deflective mirror
5 mm or 8 mm screws (depending on configuration)
Torx T10 screwdriver
Consider wearing gloves during the installation process to keep the mirror clean and prevent scratches. Keep the protective layer on the mirror until the end of the installation to protect the mirror.
Mount the mirror bracket onto the device, aligning it with the mounting holes.
If you are mounting the mirror directly onto the scanner, use 5 mm screws.
Insert the four 5 mm screws and hand-tighten them to mount the adjustable bracket onto the device. Recommended torque: 2-3 Nm / 17-26 lbf-in.
If you are installing the mounting bracket on top of the deflective mirror, use 8 mm screws. The back mounting holes on the scanner remain accessible when the mirror is mounted.
