1. xS40/70 Smart Camera Product Reference Guide
  2. Installation
  3. Installing an Illumination System
  4. Disassembling the Illumination System
  • xS40/70 Smart Camera Product Reference Guide
Disassembling the Illumination System
View content for :
Product:

Disassembling the Illumination System

To disassemble the illumination system on the device, follow the steps below:
  1. Remove the four screws and remove the top cover.
  2. Remove the illumination plate assembly.
  3. Remove the filter (if applicable).
  4. Remove the two screws and gently lift the PCB to disconnect it from the device.
The gasket can be left in place unless damaged. Replace the gasket if it is damaged to maintain its IP67 specification.
Lens Disassembly
1
ESD Safe Cover (Four Screws)
2
Illumination Plate Sub-Assembly
3
Filter Assembly
4
Illumination PCB (Two Screws)
5
Illumination Plate Gasket
6
Main Assembly