Event | Beeper | 360° LED | Power LED | Device Status LED | Focus Status LED | Warning LED |
|---|---|---|---|---|---|---|
Power Up | ||||||
Power up with Low Power | 
Low, Medium, High Tone |  Single Green Blink |  Solid Red | - | - | - |
Power up with Limited Power
(USB or 15W PoE) |
Low, Medium, High Tone | Single Green Blink |  Solid Amber | - | - | - |
Power up with Full Power
(24V or 30W PoE) |
Low, Medium, High Tone | Single Green Blink |  Solid Green | - | - | - |
Job Error | 
Low, Low Tone | - | Solid Green | Solid Red | - | Solid Red |
Device Maintenance | ||||||
Factory Reset | 
Medium, Medium Tone |  Continuous Red Flash (5hz) | Solid Green | - | - | - |
Firmware Operations | ||||||
Firmware Update Start | - | Continuous Red Flash (2hz) | Solid Green |  Continuous Red Flash (2hz) | - | - |
Firmware Update Success | - | - | Solid Green | - | - | - |
Firmware Update Fail | 
Low Tone | Continuous Red Flash (5hz) | Solid Green | Continuous Red Flash (5hz) | - | - |
Autotune Operations | ||||||
AutoTune Start | 
Medium Tone | - | Solid Green | - |  Continuous Green (2Hz) | - |
AutoTune Success | 
High Tone | - | Solid Green | - | Solid Green | - |
AutoTune Fail |
Low Tone | - | Solid Green | - | Solid Red | - |
Decode | ||||||
Barcode Decode Start 1 | - | - | Solid Green | Solid Amber | - | - |
Barcode Decode Success 1 |
Medium Tone | Single Green Flash | Solid Green | - | - | - |
Barcode Decode Failure | - | Single Red Flash | Solid Green | - | - | - |
Parameter Programming | ||||||
Parameter Entry Accepted | 
High, Low, High, Low Tone | Single Green Blink | - | Solid Green | - | - |
Parameter Number Entry Expecting Barcodes | 
High, Low Tone | Single Green Blink | - | Solid Green | - | - |
Parameter Entry Error | 
Low, High Tone | Single Red Blink | - | Solid Green | - | - |
