1. Zebra Rapixo CoF Product Reference Guide
  2. Technical reference
  3. Status LEDs on Zebra Rapixo CoF
  4. Board status LEDs
  • Zebra Rapixo CoF Product Reference Guide
Board status LEDs

Board status LEDs

Zebra Rapixo CoF has four board status LEDs to indicate the status of the board: board-power good, board configuration, PCIe speed/#lanes, and fallback board configuration.
LEDs found on the Rapixo CoF Board
The table below outlines the possible colors for each LED and their definitions.
LED
LED color and state
Description
1. Board-power good
Off/Red
One or more of the on-board voltage regulators did not start. If your computer is on and this LED state occurs, there is an issue with the voltage regulators on your Zebra Rapixo CoF. Contact Zebra technical support.
Green
All of the on-board voltage regulators are working properly.
2. Board configuration
Red
The board is not configured.
Green
The board is configured.
3. PCIe speed /# lanes
Off
The PCIe link is down.
Blinking red
Slot is PCIe 1.x and not all lanes are active.
Blinking orange
Slot is PCIe 2.x and not all lanes are active.
Blinking green
Slot is PCIe 3.x and not all lanes are active.
Solid red
Slot is PCIe 1.x and all lanes are active.
Solid orange
Slot is PCIe 2.x and all lanes are active.
Solid green
Slot is PCIe 3.x and all lanes are active.
4. fallback board configuration
Off
The normal board configuration is being used.
On
The normal board configuration was corrupt. The fallback (golden) board configuration is being used.