1. Zebra Rapixo CoF Product Reference Guide
  2. Technical reference
  3. Status LEDs on Zebra Rapixo CoF
  4. CoaXPress LEDs
  • Zebra Rapixo CoF Product Reference Guide
CoaXPress LEDs

CoaXPress LEDs

Zebra Rapixo CoF has one CoaXPress LED per connection. Each LED indicates the connection status between the device (camera) plugged into the LED’s associated connector and the Host (frame grabber). Each LED also indicates whether the device is sending data, and whether Zebra Rapixo CoF is transmitting power to the device.
LED color and state
Description
Off
Zebra Rapixo CoF is not receiving power.
Orange, solid
Zebra Rapixo CoF is booting.
Red, slow pulse
Zebra Rapixo CoF driver has started, but nothing is connected.
Green, solid
The device is compatible and Zebra Rapixo CoF has established a connection with the device (on the specified cable).
This requires an MdigAlloc() call. No data is being transferred.
Orange, slow pulse
Zebra Rapixo CoF is waiting for a grab trigger.
This state only occurs in triggered grab mode.
Green, fast flash
Zebra Rapixo CoF is receiving data from the connected device.
Red, 500 ms pulse
An error occurred during data transfer.
Red, fast flash
A CoaXPress system error occurred on the Zebra Rapixo CoF board. This type of error can prevent Zebra Rapixo CoF from receiving data.