Device Features

This section lists the features of the PS30 personal shopper.

Device Front View
Number	Item	Description
1	LED status	Indicates the battery charge state while charging or the scan/decode status. Red: Barcode scan in progress. (Scan key is pressed with Decoding LED Notification enabled*.) Single Green Blink: Successful decode.
2	Touch screen	Displays all information needed to operate the device.
3	Scan key	This key functions in the following ways: Turns on the device when pressed and held for 3 seconds. Operates the imager when a scanning application is active. Functions as a Select/Enter key.

* To enable Decoding LED Notification, do the following:

Swipe up from the bottom of the screen, and open the DWDemo app.

Touch the three dots on the lower-right corner, and then touch

Settings

.

Touch

Configure scanner settings

Scan params

.

Touch the checkbox to enable

Decoding LED Notification

.

Device Rear and Side View
Number	Item	Description
1	Speakers	Provides audio output for video, music, and notifications.
2	Battery cover	Encloses the battery and attaches to the device’s handle.
3	Power/Cradle I/O Connector	Provides charging via cradle and cradle communication to lock/unlock the cradle slots. Use to perform a hard reset with the terminal reboot tool. For more information, see Interface Connector Pin-Outs.

Device Front View
Number	Item	Description
1	Red dot aimer	Provides a background aiming pattern, which allows positioning of the barcode within the imager's field of view.
2	Imager	Scans and reads barcodes.
3	Illuminator	Provides increased visibility in bright lighting conditions.
4	Microphone	Use for audio input and SmartLens locationing. Allows shoppers to speak to a store associate or to a virtual assistant via speech-to-text.