• CV60 Area Scan Camera
Automatic Detection
Automatic Detection

Automatic Detection

Automatic Detection identifies lit defective pixels (for example, white blemishes).
To use Automatic Detection to identify defective pixels:
  1. Shield the camera sensor. If a lens is attached, use the lens cap as a shield.
  2. Configure the threshold level for defective pixel detection. Up to 256 pixels can be corrected. The threshold value is specified as a percentage. The default setting is 10, with 10% of the full scale (100%) defined as the threshold value.
  3. Execute
    BlemishDetect
     to start automatic detection. After detection, the interpolation data is saved to the camera's internal memory.
Review the number of pixels interpolated using Automatic Detection by loading the
BlemishNum
 data.