1. CV60 Area Scan Camera
  2. Main Functions
  3. Sequencer
  4. Trigger Sequence Mode
  • CV60 Area Scan Camera
Trigger Sequence Mode

Trigger Sequence Mode

Trigger Sequence Mode enables a user-defined Sequencer Trigger pattern.
The operation of this mode is controlled using the following commands:
  • SequencerSetActive
     - confirm the index number displayed on the next trigger reception.
  • SequencerSetStart
     - configure the index number to execute at the start of the
    TriggerSequencer
     mode.
  • SequencerReset
     - enable this to switch the index number executed to the one specified in
    SequencerSetStart
     during
    TriggerSequencer
     mode operation.
  • SequencerRepetition
     - this parameter applies to
    TriggerSequencer
     patterns with the
    SequencerROINextIndex
     set to
    0 (Off)
    . When execution completes, the index
    SequencerROINextIndex
     is set to
    0 (Off)
    , and the
    SequencerRepetition
     (range = 1-255) is decremented internally. If the result of the decrement is not zero, the
    TriggerSequencer
     pattern restarts from the index specified in
    SequencerSetStart
    . If the result of the decrement is zero, the status updates to
    Acquisition Stop
     and external triggers are not accepted.