• CV60 Area Scan Camera
GPIO
GPIO

GPIO

Configure the input/output signals for the external input/output connectors.
External Output
Line 2: Opt Out
DC IN/TRIG IN connector (6-pin round)
External Input
Line 5: Opt In
DC IN/TRIG IN connector (6-pin round)
These signals can be used as triggers and other necessary signals within the camera or as signals output from the camera to the system, such as those used for lighting equipment control.
Select an input or output in
LineSelector
. Next, review
LineMode
 and
LineFormat
 to set [LineInverter].
Monitor the status of each digital I/O as shown in the table with
LineStatusAll
.
LineSelector
LineMode
LineFormat
LineInverter
LineStatusAll
Line2
Output
OptoCoupled
True/False
bit1
DC IN / TRIG IN connector
(6-pin round)
Line5
Input
OptoCoupled
False (fixed)
bit4
DC IN / TRIG IN connector
(6-pin round)
Nand0In1
Input
InternalSignal
True/False
Nand0In2
Input
InternalSignal
True/False
Nand1In1
Input
InternalSignal
True/False
Nand1In2
Input
InternalSignal
True/False
TimestampReset
Internal Connection
InternalSignal
False (fixed)
Set the output source signal using
LineSource
 when configuring digital output. Next, set the source signal for NAND Logic (Nand0In1, Nand0In2, Nand1In1, NandIn2) and
TimestampReset
.