Solutions
Products
Support and Downloads
About Zebra
CV60 Area Scan Camera
CV60 Area Scan Camera
About This Guide
Configurations
Accessories
Notational Conventions
Icon Conventions
Service Information
Using CaptureWorks and Design Assistant
Main Functions
Acquisition Control
Exposure Mode
Trigger Control
Pixel Format
Image Flip Function
GPIO
Video Process Bypass Mode
Calculating the Maximum Frame Rate
Timing Charts
CV60-AS02MC Timing Diagram
CV60-AS05MC Timing Diagrams
CV60-AS09MC Timing Diagrams
CV60-AS12MC Timing Diagrams
Gain Control
Color Camera Gain Control
Monochrome Camera Gain Control
White Balance
Automatic Level Control
Gamma Function
Lookup Table
Blemish Compensation
Automatic Detection
Manual Configuration
Shading Correction
Binning Function
Decimation Mode
Single ROI
Pulse Generator
Sequencer
Using Indexes
Trigger Sequence Mode
Sample TriggerSequencer Mode Operation
Command Sequencer Mode
Counter and Timer Control
Chunk Data
Event Control
Action Control
Configuring Camera Settings
Precision Time Protocol
Non-Volatile Flash Memory
Troubleshooting
Specifications
Specifications
Dimensions
Connector Diagrams
Circuit Diagrams
Spectral Response
CV60-AS02 Spectral Response Tables
CV60-AS05 Spectral Response Tables
CV60-AS09 Spectral Response Tables
CV60-AS12 Spectral Response Tables
Sample TriggerSequencer Mode Operation
Sample TriggerSequencer Mode Operation
Sample TriggerSequencer Mode Operation
Specify 1 in
SequencerSetStart
, and start
TriggerSequencer
mode with index 1.
Capture a 2-frame image with the first and second triggers.
For the following index, configure index three specified in
SequencerSetNext,
and capture an image with the number of frames (the number of triggers) specified in
SequencerFrameNumber.
TriggerSequencer Mode Operation
Proceed to sequence from index 4 to index 2 to index 1.
You can also specify 0 to indicate the end of
TriggerSequencer
mode in
SequencerSetNext
in an index of 2 and specify the number of repetitions in
SequencerRepetition.
.
Sequencer
