Installing the 10-Slot Cradle Rack
Installing the 10-Slot Cradle Rack

Installing the 10-Slot Cradle Rack

  1. Place the power supply in bottom tray.
  2. Connect AC line cord to power supply.
  3. Connect DC line cord to power supply.
  4. Secure power supply and cables to bottom tray with tie wraps.
    Ensure tie wrap buckle is on side of power supply. Tie wrap buckle on top of power supply interferes with the top tray.
  5. Route cables through cable slots.
    route cables in rack
    1
    DC line cord
    2
    Power supply
    3
    AC line cord
  6. Secure four M2.5 studs to top tray as shown.
    install studs
  7. Align and install 10-Slot cradle onto studs of the top tray.
  8. Secure cradle to the top tray with two M2.5 safety screws.
  9. Slide the top tray onto the bottom tray.
  10. Connect cables to the cradle.
  11. Secure top tray to the bottom tray with 4 M5 screws (two on each side).
    See Rack Mount for installing the bracket assembly onto a rack.