Installing the Rack or Wall Mount Plate

Secure two M2.5 studs to the top tray as shown.

Align and install 10-Slot cradle onto studs of plate.

Secure cradle to the top tray with two M2.5 safety screws.

Place the power supply on the tray shelf.

Connect AC line cord to power supply.

Connect DC line cord to power supply.

Secure power supply and cables to tray with tie wraps.

Route DC line cord through cable slot.

1	DC line cord
2	Power supply

Connect cable to cradle.

Use screws provided with rack system. Refer to the rack user documentation for instructions.

Install two screws for top of the mounting plate. The screw heads should protrude half way from the rail.

Align the mounting plate’s top mounting key holes with the screws.

Hang the bracket on the screws.

Install two bottom screws.

Tighten all screws.

Route cables and connect to power source.

Installer should ensure that all building codes are followed when connecting the power supplies to an AC power source.

While installing the brackets, power supplies and cables:

Use tie wraps to secure cables to the bracket and rails.

Coil cables wherever possible.

Route power cables along the rails.

Route inter-cradle cables to the side rails and then from the rails to the bracket.