The Heater Control app is only applicable to freezer configurations.
The scanner exit window heater ensures optimum scanner performance in freezer applications.
The Status tab displays the following details:
Temperature
Display
Vent
Scanner Window
Scanner Bay.
Heater
Touch Panel Heater (default - disabled). This option should always be enabled for the heater to function properly. Disable this option only if you are performing debugging activities on the heater system. (A11 only)
Scanner Window (default - enabled). This option should always be enabled for the heater to function properly. Disable this option only if you are performing debugging activities on the heater system.
The Advanced tab displays the following details:
In the
Heater
area, tap to disable Scanner Window Heater. (default - enabled).
In the
Advanced
area, tap to enable Logging. Logging allows you to log data for the heating system (heaters and sensors). The data resides in the
/sdcard/Android/data/com.symbol.heatercontrolserv/files/HeaterLogs/
location in a .csv file on the device.
Click
TEST HEATER
to perform a diagnostic test on the heating system.
Heater tests must be performed in an ambient environment with a temperature of less than +30° C (86° F).
After the tests are complete, the results screen displays.
.