1. MC9400/MC9450 Product Reference Guide
  2. Wireless
  3. Wireless Local Area Networks
  4. WLAN Configuration
  5. Manually Adding a Wi-Fi Network
  • MC9400/MC9450 Product Reference Guide
Manually Adding a Wi-Fi Network

Manually Adding a Wi-Fi Network

Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or add a Wi-Fi network when out of range.
  1. Go to
    Settings
    .
  2. Touch
    Network & internet
    Internet
     .
  3. Slide the Wi-Fi switch to the
    On
     position.
  4. Scroll to the bottom of the list and select
    Add network
    .
  5. In the
    Network name
     text box, enter the name of the Wi-Fi network.
  6. In the
    Security
     drop-down list, set the type of security to:
    • None
    • Enhanced Open
    • WEP
    • WPA/WPA2-Personal
    • WPA3-Personal
    • WPA/WPA2/WPA3-Enterprise
    • WPA3-Enterprise 192-bit
  7. If the network security is:
    None
    Enhanced Open
    Touch
    Save
    .
    WEP
    WPA2-Personal
    WPA/WPA3-Personal
    Enter the required password and then touch
    Save
    .
    WPA/WPA2/WPA3 Enterprise
    1. Touch the
      EAP method
       drop-down list and select one of the following:
      • PEAP
      • TLS
      • TTLS
      • PWD
      • LEAP
    2. Fill in the appropriate information. Options vary depending on the
      EAP method
       chosen.
      • When selecting
        CA certificate
        , Certification Authority (CA) certificates are installed using the
        Security
         settings.
      • When using the EAP methods PEAP, TLS, or TTLS, specify a domain.
      • Touch
        Advanced options
         to display additional network options.
    WPA3-Enterprise 192-bit
    1. Touch
      CA certificate
       and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings.
    2. Touch
      User certificate
       and select a user certificate. Note: User certificates are installed using the Security settings.
    3. In the
      Identity
       text box, enter the username credentials.
    By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server for setting the connection to a proxy server and see Configuring the Device to Use a Static IP Address for setting the device to use a static IP address.
  8. Touch
    Save
    . To connect to the saved network, touch and hold on the saved network and select
    Connect to network
    .