Manually Adding a Wi-Fi Network

Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or add a Wi-Fi network when out of range.

Go to

Settings

.

Touch

Network & internet

Internet

.

Slide the Wi-Fi switch to the

On

position.

Scroll to the bottom of the list and select

Add network

.

In the

Network name

text box, enter the name of the Wi-Fi network.

In the

Security

drop-down list, set the type of security to:

None

Enhanced Open

WEP

WPA/WPA2-Personal

WPA3-Personal

WPA/WPA2/WPA3-Enterprise

WPA3-Enterprise 192-bit

If the network security is:

None Enhanced Open	Touch Save .
WEP WPA2-Personal WPA/WPA3-Personal	Enter the required password and then touch Save .
WPA/WPA2/WPA3 Enterprise	Touch the EAP method drop-down list and select one of the following: PEAP TLS TTLS PWD LEAP Fill in the appropriate information. Options vary depending on the EAP method chosen. When selecting CA certificate , Certification Authority (CA) certificates are installed using the Security settings. When using the EAP methods PEAP, TLS, or TTLS, specify a domain. Touch Advanced options to display additional network options.
WPA3-Enterprise 192-bit	Touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are installed using the Security settings. Touch User certificate and select a user certificate. Note: User certificates are installed using the Security settings. In the Identity text box, enter the username credentials.

By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a Proxy Server for setting the connection to a proxy server and see Configuring the Device to Use a Static IP Address for setting the device to use a static IP address.

Touch

Save

. To connect to the saved network, touch and hold on the saved network and select

Connect to network

.