Category | LED Indication | Beep Indication | Description |
|---|---|---|---|
Standard Use | Green | Low/Medium/High | Device is powered on. |
Scanning Indications | Green single flash | High | A barcode was decoded. |
Red | 4x Low | Transmission error. | |
Red | 5x Low | Conversion or format error. | |
Red | Low/High/Low/High | Out of batch memory storage. Unable to store a new barcode. | |
Radio Indications | Red/Green blinking | 6x Short High | Device in paging state. |
Blue double blink | High/low | Bluetooth communication is disconnected. | |
Blue slow blinking | None | Attempting to reconnect over Bluetooth. | |
None | Low/high | Bluetooth connection established. | |
None | Long low/ long high | Bluetooth connection attempt failed. | |
Blue during beep sequence | Long low/ long high/ Long low/ long high | Bluetooth connection attempt is rejected. | |
Blue slow blinking | 5x High | Attempting to reconnect over Bluetooth (disabled by default). | |
Blue blinking | 3x Short high | Bluetooth disconnect indication (disabled by default). | |
Battery Indications | Red | 4x Short high | Low battery indicator. |
Green/Amber/Red | N/A | Battery charge level indication (hold trigger for three seconds to activate).
| |
Red blinking | N/A | Battery is bad or over temperature. | |
Parameter Programing | Red | Long low/long high beeps | Input error, incorrect barcode or Cancel scanned, wrong entry, incorrect barcode programming sequence; remain in program mode. |
Green | High/low beeps | Keyboard parameter selected. Enter value using barcode keypad. | |
Green | High/low/high/low beeps | Successful program exit with change in the parameter setting. | |
Maintenance Indications | Green slow blinking | Scanner connected to 123Scan. | |
Red fast blinking | File is transferring to the scanner (new configuration parameters or firmware) via 123Scan. | ||
Red slow blinking | Firmware installation. | ||
Green | Programing completed successfully (parameter changes or firmware updated) via 123Scan. |
