Beeper Sequence | Indication |
|---|---|
High/low/high/low beeps | Pairing barcode scanned. |
Short low/high beeps | Scanner paired with the cradle. |
Short high/low beeps | Scanner unpaired with the cradle.
When connected to a remote device using SPP or HID, if a disconnect beep sequence sounds immediately after scanning a barcode, check the host device to determine if it received the transmitted data. The scanner may have transmitted the last barcode scanned after losing the connection. |
Long low long/high beeps | Unsuccessful pairing attempt. See Auto-reconnect Parameters. |
Long low/long high/long low/ long high beeps | Remote device rejected the connection attempt, possibly due to an attempt to pair with a cradle that is already paired with the maximum number of scanners. |
Long high beeps. | The Audio Virtual Tether alarm on scanner is enabled. |
Four long low beeps | A transmission error occurred and the data is ignored, due to an improperly configured scanner. Check option setting. |
During cradle communication, the scanner did not receive acknowledgment of data receipt from the cradle. However, the host may have received the data. Check the host for receipt of the data, and re-scan the barcode if it was not received. | |
Five high beeps | Emitted every five seconds during a reconnection attempt. See Auto-reconnect Parameters. |
