RFID > Read RFID Data
RFID > Read RFID Data

RFID > Read RFID Data

Read and return the specified tag data from the RFID tag located over the RFID antenna. No printer movement occurs while tag data is being read. The printhead can be open or closed.
To read and display the information stored on an RFID tag, position the RFID label with its transponder over the RFID antenna, then touch
Read RFID Data
The results of the test are shown on the display.
Related ZPL command(s):
SGD command used:
  • rfid.tag.read.content
  • rfid.tag.read.execute