Connection > Bluetooth > Friendly Name

Connection > Bluetooth > Friendly Name

This command sets the friendly name, which is used during service discovery.
For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
For changes to take effect, turn printer power OFF and then ON. Alternatively, issue the
device.reset
command.
Another way to reset the network is to use the Reset Network menu option. See Connection > Networks > Reset Network.
If you do not set a friendly name for the printer for easier discovery, the name defaults to the printer serial number.
Bluetooth Friendly Name
Accepted value: 17-character text string
SGD command used:
bluetooth.friendly_name