Connection > WLAN > WLAN Gateway

Connection > WLAN > WLAN Gateway

View and, if necessary, change the default wireless gateway.
For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
To save changes you make to this setting, set
Connection
WLAN
WLAN IP Protocol
to PERMANENT. Then reset the print server. See Connection > Networks > Reset Network.
WLAN Gateway
Accepted values: 000 to 255 (for each field)
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.gateway
Printer web page:
View and Modify Printer Settings
Network Communications Setup
Wireless Setup