Connection > Wired > Wired Gateway

Connection > Wired > Wired Gateway

Use this screen to view and if necessary change the default wired gateway.
For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
To save any changes you make to this setting, set
Connection
Wired
Wired IP Protocol to PERMANENT
. Then reset the print server (see Connection > Networks > Reset Network).
Wired Gateway
Accepted values: 000 to 255 (for each field)
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.gateway
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings