Connection > WLAN > WLAN Subnet

Connection > WLAN > WLAN Subnet

Use this screen to view and if necessary change the wireless subnet mask.
For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
To save changes to this setting, set
Connection
WLAN
WLAN IP Protocol
. to PERMANENT. Then reset the print server. See Connection > Networks > Reset Network.
WLAN Subnet
Accepted values: 000 to 255 (for each field)
Related ZPL command(s):
^ND
SGD command used:
wlan.ip.netmask
Printer web page:
View and Modify Printer Settings
Network Communications Setup
Wireless Setup