Connection > Wired > Wired IP Address

Connection > Wired > Wired IP Address

View and, if necessary, change the printer’s wired IP address.
For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
To save any changes you make to this setting, set
Connection
Wired
Wired IP Protocol
to PERMANENT. Then reset the print server (see Connection > Networks > Reset Network).
Wired IP Address
Accepted values: 000 to 255 (for each field)
Related ZPL command(s):
^ND
SGD command used:
internal_wired.ip.addr
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings