USB Port: For installing printers connected with the USB cable. Connect the printer to the computer as shown in Connect to a Computer Using the Printer’s USB Port on page 55. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.
Bluetooth Port: For installing printers with a Bluetooth connection. Not applicable for this printer.
Other: For installation on another type of cable, such as Parallel (LPT) and Serial (COM). No additional configuration is necessary.
If prompted, select your printer model and resolution.
The model and resolution are on a part number sticker on the printer, usually located below the media hanger. The information will be in the following format:
Part Number: XXXXXxY – xxxxxxxx where XXXXX = the printer model Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi) For example, in the part number ZT230x3 – xxxxxxxx ZT230 indicates that the printer is a ZT230 model 3 indicates that the printhead resolution is 300 dpi
where
XXXXX = the printer model
Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi)
Part Number: XXXXXxY – xxxxxxxx where XXXXX = the printer model Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi) For example, in the part number ZT230x3 – xxxxxxxx ZT230 indicates that the printer is a ZT230 model 3 indicates that the printhead resolution is 300 dpi
