1. ZT200 Series Industrial Printer User Guide
  2. Troubleshooting
  3. Printer Diagnostics
  4. FEED and PAUSE Self Test
  • ZT200 Series Industrial Printer User Guide
FEED and PAUSE Self Test

FEED and PAUSE Self Test

Performing this self test resets the printer configuration to the factory default values. Perform a sensor calibration after this self test. (See Calibrating the Ribbon and Media Sensors.)
  1. Turn off (O) the printer.
  2. Press and hold
    FEED + PAUSE
     while turning on (I) the printer.
  3. Hold
    FEED + PAUSE
     until the first control panel light turns off.
    The printer configuration is reset to the factory default values. No labels print at the end of this test.