Network Settings

Network Settings

Network Settings
Network Setting
Description
IP Address
View and, if necessary, change the printer’s IP address.
To save changes to this setting, set IP Protocol to PERMANENT, and then reset the print server, see Reset Network.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer.
Main Menu > NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.addrWireless: ip.addr, wlan.ip.addr
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings
Subnet Mask
View and, if necessary, change the subnet mask.
To save changes to this setting, set IP Protocol to PERMANENT, and then reset the print server, see Reset Network.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer.
Main Menu > NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.netmaskWireless: wlan.ip.netmask
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings
Gateway
View or Set the Default Gateway
View and, if necessary, change the default gateway.
To save changes to this setting, set IP Protocol to PERMANENT, and then reset the print server, see Reset Network.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer.
Main Menu > NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.gatewayWireless: wlan.ip.gateway
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings
IP Protocol
This parameter tells if the user (permanent) or the server (dynamic) selects the IP address. When a dynamic option is chosen, this parameter tells the method(s) by which the wired or wireless print server receives the IP address from the server.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer.
Main Menu > NETWORK
Accepted values:
  • ALL
  • GLEANING ONLY
  • RARP
  • BOOTP
  • DHCP
  • DHCP & BOOTP
  • PERMANENT
Related ZPL command(s):
^ND
SGD command used:
Wired: internal_wired.ip.protocolWireless: wlan.ip.protocol
Printer web page:
View and Modify Printer Settings
Network Communications Setup
TCP/IP Settings
Active Print Server
Only one print server (wired or wireless) can be installed at a time. Therefore, the print server installed is the active print server.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer. It cannot be modified from the control panel.
Main Menu > NETWORK
MAC Address
View the MAC Address
View the Media Access Control (MAC) address of the print server that is installed in the printer (wired or wireless).
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer. It cannot be modified from the control panel.
Main Menu > NETWORK
SGD command used:
Wired: internal_wired.mac_addrWireless: wlan.mac_addr
Printer web page:
View and Modify Printer Settings
Network Communications Setup
Wireless Setup
ESSID
View the ESSID Value
The Extended Service Set Identification (ESSID) is an identifier for your wireless network. This setting, which cannot be modified from the control panel, gives the ESSID for the current wireless configuration.
User menu item: *
* This menu item appears only if a wired or wireless print server is installed in your printer. It cannot be modified from the control panel.
Main Menu > NETWORK
Accepted values:
32-character alphanumeric string (default 125)
SGD command used:
wlan.essid
Printer web page:
View and Modify Printer Settings
Network Communications Setup
Wireless Setup
Reset Network
This option resets the wired or wireless print server. You must reset the print server to allow any changes to the network settings to take effect.
User menu item:
Main Menu > NETWORK
Related ZPL command(s):
~WR
SGD command used:
device.reset
Printer web page:
Print Server Settings
Factory Print Server Settings