Final Steps for Tear-Off Mode

Slide in the outer media guide until it just touches the edge of the media.

Rotate the printhead-open lever downward until it locks the printhead in place.

Set the printer to Tear-Off mode (for more information, see Print Mode).

Close the media door.

Press

PAUSE

to exit pause mode and enable printing.

The printer may perform a label calibration or feed a label, depending on your settings.

For optimal results, calibrate the printer. See Calibrating the Ribbon and Media Sensors.

Verify that your printer is able to print a configuration label by holding both the

FEED

and

CANCEL

keys for 2 seconds.

Media loading in Tear-Off mode is complete.