Perform the following steps to operate Zebra 4Sight XV7 for the first time:
Mount the unit to your equipment so that it is not prone to being knocked off of its surface. For information see the Zebra 4Sight XV7 mounting section.
Connect your display device, keyboard, and mouse to the unit.
Depending on which power supply you are using, you will need to connect the 4Sight XV7 to either the AC or DC power supply. For information on how to connect your unit to power, see Powering the Zebra 4Sight XV7 unit. Once the power supply and external devices are connected turn the unit on using the power switch on the front panel.
Once the unit boots, use the presented drop-down menu to select your language. Once you have selected the language, you cannot change your selection (you will have to reinstall the operating system to change the language).
Zebra 4Sight XV7 assumes that your keyboard language is the same as the language you selected.
Verify that your connected devices are operating correctly.
Once your devices are operational, you can power down the unit to connect devices to the motherboard. For information on adding hardware to the Zebra 4Sight XV7 motherboard, see Installing Full-Height, Three-Quarter Length PCIe Boards.
