You can connect Zebra 4Sight XV7 to your local area network (LAN), via 2.5 Gigabit Ethernet, or Fast Ethernet (100 BaseT). To do so, connect a network cable to one of the four Gigabit Ethernet connectors, located on the back panel of the chassis.
To make the connection, use an appropriate network cable. The required type of network cable depends on the type of connection:
Connection
Minimum category for network cable
Gigabit Ethernet
Category 5e (CAT5e)/ Category 6 (CAT6) cable
Fast Ethernet (100 Mbits/sec)
Twisted Pair Category 5 (UTP5) cable
10 Mbits/sec
UTP5/UTP3 cable
An RJ45 connector (shown below) must be attached to each end of the cable.
Each of the Gigabit Ethernet connectors on Zebra 4Sight XV7 has 2 LEDs to convey network activity and speed information. For information on how to read the LEDs, see the Light emitting diodes (LEDs) section.
