Zebra 4Sight XV7 Mounting

The Zebra 4Sight XV7 unit comes with two external mounting brackets that can be attached to the unit. These brackets are used to attach the unit to shelves or other static parts of your production environment. Use these brackets so that the Zebra 4Sight XV7 unit is not prone to being knocked off its surface.

To attach the mounting brackets, perform the following:

Install the brackets horizontally: Position the XV7 with the side panel facing upward. The mounting brackets can be installed on the underside of the XV7.

side view — Panel of XV7 with the On/Off switch and front LEDs in a Horizontal Position

side view 3 — Zebra 4Sight XV7 in a Horizontal Position

Install the brackets vertically: Position the XV7 with the On/Off switch and front LEDs at the top of the front panel. The mounting brackets must be installed underneath the XV7 unit.

bottom view 2 — Panel of XV7 with the On/Off switch and front LEDs in a Vertical Position

bottom view 3 — Zebra 4Sight XV7 in a Vertical Position

Align the three holes on each bracket with the mounting holes on the Zebra 4Sight XV7 unit. Use the screws in the mounting bracket bag to attach the mounting brackets to the Zebra 4Sight XV7 unit.

bottom view — Attaching Brackets Horizontally

Attaching Brackets Vertically

Fasten the mounting brackets to your equipment using the key holes on the brackets. Use fasteners of appropriate size and length to mount securely. Ensure that Zebra 4Sight XV7 is mounted to equipment that is sturdy and durable (for example, metallic equipment).