To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content.
Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
Point the exit window of the device at a barcode.
Press and hold the scan button.
The green aiming dot with white illumination turns on to assist in aiming.
When the device is in Pick List Mode, the device does not decode the barcode until the center of the aiming dot touches the barcode.
Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
Aiming Pattern
When the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.
Aiming Pattern - Picklist
The Data Capture LED light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
Release the scan button.
The barcode content data appears in the text field.
Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed.
