1. FR55 Product Reference Guide
  2. Getting Started
  3. Setting Up the Device
  4. Installing a SIM Card
  • FR55 Touch Computer
Installing a SIM Card
View content for :
Product:

Installing a SIM Card

This section describes how to install a SIM card, which is required to make calls, send text messages, and transfer data over a cellular network. The slot is located under the battery pack.
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.
  1. Lift the access door.
    Removing the access cover from inside the device.
  2. Slide the SIM card holder to the unlock position.
    Image of sliding SIM card holder to the left to unlock.
    Depending on the configuration of the FR55 being used, the layout of the memory/data slots will differ. The configuration is indicated on the access door. The process for installing the SIM card will stay the same.
  3. Lift the SIM card holder door.
    Image of SIM card holder opening to the left.
  4. Place the SIM card into the card holder with the contacts facing down.
    Image of SIM card facing down and being inserted into the holder.
  5. Close the SIM card holder door.
    Image of SIM card holder door closing to the right.
  6. Slide the SIM card holder to the lock position.
    Image of sliding SIM card holder to the left to unlock.
  7. The access door must be replaced and securely seated to ensure proper device sealing.
  8. Reinstall the access door.
    Replacing the access cover in the device.