1. ZD421 and ZD621 Series Desktop Printers User Guide
  2. Print Operations
  3. Select a Print Mode or Collection Method
  • ZD421 and ZD621 Desktop Printers User Guide
Select a Print Mode or Collection Method

Select a Print Mode or Collection Method

To set the printer to use a specific print mode, see instructions on using the
^MM
 command in the ZPL Programming Guide. To download this manual, go to one of the printer information links listed in zebra.com/support.
Your printer supports these print modes:
Tear Off (default; available with any printer option and with most media types)
The printer prints the labels as it receives them. The labels can be torn off after they print.
Peel (if you have the Label Dispenser option installed)
The printer peels the label from the liner while printing. It pauses to print the next label until the current one is removed.
Cutter (if you have the Cutter option which is factory-installed)
The printer cuts each label after it is printed.
To set the printer to use an available print mode: