Language Settings
Language Settings

Language Settings

Language Settings
Language Setting
Description
Language
If necessary, change the language that the printer displays.
This change affects the words shown on the following:
  • the Home menu
  • the user menus
  • error messages
  • the printer configuration label, the network configuration label, and other labels that you can select to print through the user menus
User menu item:
Main Menu > SETTINGS
Main Menu > LANGUAGE
The selections for this parameter are displayed in the actual languages to make it easier for you to find one that you are able to read.
Accepted values:
ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN, NORWEGIAN, PORTUGUESE, SWEDISH, DANISH, SPANISH 2, DUTCH, FINNISH
Related ZPL command(s):
^KL
SGD command used:
display.language
Printer web page:
View and Modify Printer Settings
General Setup
Language
Command Language
Enable this menu item to allow certain ZPL commands to override the printer’s current settings.
User menu item:
Main Menu > LANGUAGE
Accepted values:
  • EPL_ZPL
  • HYBRID_XML_ZPL
  • EPL
SGD command used:
device.languages
Command Character
Set the Format Command Prefix Value
The format command prefix is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start of a ZPL/ZPL II format instruction.
Set the format command character to match what is used in your label formats.
You cannot use the same hex value for the format command prefix, control character, and delimiter characters. The printer must see different characters to work properly. If you are setting the value through the control panel, the printer will skip any value that is already in use.
User menu item:
Main Menu > LANGUAGE
Accepted values:
00 to FF
Related ZPL command(s):
^CC or ~CC
SGD command used:
zpl.caret
Printer web page:
View and Modify Printer Settings
ZPL Control
Control Character
The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II control instruction. Set the control prefix character to match what is used in your label formats.
User menu item:
Main Menu > LANGUAGE
Accepted values:
00 to FF
Related ZPL command(s):
^CT or ~CT
SGD command used:
zpl.control_character
Printer web page:
View and Modify Printer Settings
ZPL Control
Delimiter Character
Set the Delimiter Character Value
The delimiter character is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions.
Set the delimiter character to match what is used in your label formats.
User menu item:
Main Menu > LANGUAGE
Accepted values:
00 to FF
Related ZPL command(s):
^CD or ~CD
SGD command used:
zpl.delimiter
Printer web page:
View and Modify Printer Settings
ZPL Control
ZPL Mode
Set the ZPL Mode
Select the mode that matches what is used in your label formats.
This printer accepts label formats written in either ZPL or ZPL II, eliminating the need to rewrite any ZPL formats that already exist. The printer remains in the selected mode until it is changed in one of the ways listed here.
User menu item:
Main Menu > LANGUAGE
Accepted values:
  • ZPL II
  • ZPL
Related ZPL command(s):
^SZ
SGD command used:
zpl.zpl_mode
Printer web page:
View and Modify Printer Settings
ZPL Control