1. US Home Page
  2. Print Drop Go Assembly Guide
  3. Security Mounting Plate
  4. (Optional) Installing the Security Plate
  • Print Drop Go Assembly Guide
(Optional) Installing the Security Plate

(Optional) Installing the Security Plate

Mount the assembly to a secure surface using the security plate.
The correct power supplies must be installed on the assembly before mounting the assembly to a surface using the security plate. Go to Installing the Power Supplies for instructions.
  1. Place the Security Mounting Plate on the installation surface.
  2. Mark the location of the four screw holes on your installation surface.
  3. If necessary, pre-drill the holes in the surface.
    The M5x30 wood screws included with the security plate do not require pre-drilling into a wood surface. If installing into a different surface, such as stainless steel, use appropriate screws.
  4. Align the security mounting plate with the marked location.
  5. Insert the four mounting screws.
    Illustration of the security plate screws
  6. On the rear of the base, remove the two M4x8 Torx screws securing the rear cable cover.
    An illustration detailing how to remove the bottom plate.
  7. Remove the rear cable cover.
  8. Align the Print Drop Go security plate tabs with the assembly.
    Illustration of the assembly lining up with the security plate
  9. Slide the assembly back to engage the tabs.
  10. Secure the assembly with the M4x8 Torx screw.
    illustration of the security plate screw.
  11. If the printer is not yet installed, install it now. Go to Installing the Printer for instructions.
  12. Reattach the rear cable cover using two M4x8 flange button-head Torx screws.
    An illustration of the attachment of the rear cover.
The Print Drop Go assembly is now secure.