1. US Home Page
  2. Print Drop Go Assembly Guide
  3. Mounting the Printer
  4. Preparing the Base
  • Print Drop Go Assembly Guide
Preparing the Base

Preparing the Base

Remove the rear cable cover and printer mounting plate to access the base interior.
  1. On the rear of the base, remove the two M4x8 Torx screws securing the rear cable cover.
    An illustration detailing how to remove the bottom plate.
  2. Remove the single M4x8 Torx screw securing the printer mounting plate.
    An illustration detailing how to remove the bottom plate.
  3. Pull the printer mounting plate rearward to detach it from the base.
The printer mounting plate is ready to be attached to the printer.