1. US Home Page
  2. Print Drop Go Assembly Guide
  3. Mounting the Tablet
  4. Installing the VESA Adapter
  • Print Drop Go Assembly Guide
Installing the VESA Adapter

Installing the VESA Adapter

Attach the VESA adapter to the rear of the ET4x tablet and route the DC cable.
  1. On the power supply (PWRBGA12V50W0WW), remove and discard the tape (1) securing the clip (2) to the connector.
    The psu clip
  2. Insert the tabbed end of the VESA mount into the battery well. Ensure that the tabs on the VESA mount align with the slots in the battery well.
    Insert VESA Mount
  3. Rotate the VESA mount down into the battery well.
  4. Carefully press down around the edges of the VESA mount. Ensure that the cover seats properly.
  5. Secure the VESA mount to the device using a T5 Torx screwdriver and four M2 screws. Torque to 0.43 N-m (3.8 lbf·in).
    Secure VESA Mount
  6. Route the DC cable through the channel so that the cable emerges near the top edge of the screen, opposite the scanner.