To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows the user to enable the scanner to decode barcode data and display the barcode content.
To scan a barcode:
Launch a scanning application.
Press the Scan key and aim the device at a barcode.
Adjust the position of the device so that the:
Red aiming dot appears at the center of the barcode on devices with the SE4710 imager.
White LED appears around the barcode on devices with the SE2100 imager.
Ensure the barcode is within the area formed by the aiming pattern. On devices with the SE4710 imager, the aiming dot is used for increased visibility in bright lighting conditions.
SE4710 Imager Decode Mode
SE4710 Imager Picklist Mode
Picklist Mode is only available on a device with the SE4710 imager. In Picklist Mode, the imager does not decode the barcode until the crosshair or aiming dot touches the barcode.
