User Interface
User Interface

User Interface

The ZD200 Series 4-inch desktop printer user interface is designed to help you with a variety of routine tasks.
Interface control
button (see Power Button)
button and the
button—individually or in combination, and along with information shown by the STATUS indicator—are designed to help you perform a range of routine printer tasks which include:
  • turning printer power ON and OFF
  • calibrating the media (labels, paper, tags, etc.)
  • printing a configuration report
  • resetting printer settings to their defaults
  • entering 'Forced' firmware download mode
  • entering and exiting diagnostic (
    ) mode to debug printer programming and communications
These buttons are modal—what happens when you press the buttons depends on what the printer is doing at the time.
Single multi-functional
(Advance) button (see FEED (Advance) Button)
STATUS Indicator (tricolor)
See Status Indicator for information on how to interpret the Status Indicator state and color.
Indicates the printer's operating status and a range of printer conditions using state and color (such as when the printer runs out of media).
The state of the indicator can be:
  • on (lit)
  • off (not lit)
  • blinking (off and on) and alternating between colors in a variety of patterns
The color can be:
  • Green—ready or functioning
  • Amber (orange/yellow)—for busy or active process (boot-up, over-temperature cooling cycle, etc.).
  • Red—needs attention