1. ZD200 Series Thermal Transfer Desktop Printer User Guide
  2. Controls and Indicators
  3. User Interface
  • ZD200 Series Thermal Transfer Printer User Guide
User Interface
View content for :
Product:

User Interface

Your desktop printer's user interface is designed to help you easily operate your printer.
Interface control
Description
1
Power
 button (for more information, see POWER Button
Either individually or in combination, and in tandem with the color and state of the STATUS indicator, the
Power
 button and the
FEED
 button are designed to help you perform a range of routine printer tasks which include:
  • turning printer power ON and OFF
  • calibrating the media (labels, paper, tags, etc.)
  • printing a configuration report
  • resetting printer settings to their defaults
  • entering 'Forced' firmware download mode
  • entering and exiting diagnostic (
    DUMP
    ) mode to debug printer programming and communications
These buttons are modal—what happens when you press the buttons depends on what the printer is doing at the time.
3
Single multi-functional
FEED
 (Advance) button (for more information, see FEED (Advance) Button)
2
STATUS Indicator (tricolor)
See Status Indicator for information on how to interpret the Status Indicator state and color.
Indicates the printer's operating status and a range of printer conditions using state and color (such as when the printer runs out of media).
The state of the indicator can be:
  • on (lit)
  • off (not lit)
  • blinking (off and on) and alternating between colors in a variety of patterns
The color can be:
  • Green—ready or functioning
  • Amber (orange/yellow)—for busy or active process (boot-up, over-temperature cooling cycle, etc.).
  • Red—needs attention