Data cables must be of fully-shielded construction and fitted with metal or metalized connector shells. Shielded cables and connectors are required to prevent radiation and reception of electrical noise.
To minimize electrical noise pickup in the cable:
Keep data cables as short as possible (1.83 m [6 ft.] recommended).
Do NOT tightly bundle the data cables with power cords.
Do NOT tie the data cables to power wire conduits.
This printer complies with FCC Rules and Regulations, Part 15, for Class A Equipment, using fully-shielded data cables. Use of unshielded cables may increase radiated emissions above the Class A limits.
