Cleaning the Label Dispenser
Cleaning the Label Dispenser

Cleaning the Label Dispenser

The label dispenser is a factory-installed option.
  1. Open the door and clean the peel bar, the inner surfaces, and the ridges on the door.
  2. Wipe the roller while rotating it. Discard the swab or cloth. Clean again to remove diluted residue.
  3. Clean the sensor window.
    The window should be clear of streaks and residue.
    1
    Inside wall
    2
    Label-taken sensor
    3
    Ridges
    4
    Pinch roller
    5
    Peel bar