Running the Printer Installation Wizard
Running the Printer Installation Wizard

Running the Printer Installation Wizard

  1. On the last screen of the driver installer, leave
    Run the Printer Installation Wizard
    checked,  then click
    Finish
    .
    The Printer Driver Wizard displays.
  2. Click
    Next
    .
  3. Click
    Install Printer Driver
    .
    The license agreement displays.
  4. Read and accept the terms of the license agreement, and then click
    Next
    .
  5. Select the communication option that you want to configure for your printer:
    • Network Port: For installing printers with an Ethernet (LAN) or wireless (Wi-Fi) network connection. Wait for the driver to scan your local network for devices and follow the prompts.
    • USB Port: For installing printers connected with the USB cable. Connect the printer to the computer. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.
    • Bluetooth Port: For installing printers with a Bluetooth connection.
    • Other: For installation on another type of cable, such as Parallel (LPT) and Serial (COM). No additional configuration is necessary.
  6. If prompted, select your printer model and resolution.
    The model and resolution are listed on the printer configuration label. See Test Printing with the Configuration Report for instructions on printing a label.)