Manual Print Width Adjustment

You can manually adjust the print width for your printer depending on your printing needs.

Place the printer in Advanced mode. See Activating Advanced Mode. Then press

PAUSE

(

) while the PAUSE indicator (

) lights up yellow.

The printer prints a 16 mm (0.63 in.) box, pauses momentarily, prints a slightly larger box, pauses again, and so on.

When you see the printer print a box that matches the width of your media, press

FEED

(

) to select that print width and return the printer to Ready state for printing.

To return to the maximum print width setting, allow the printer to proceed until it reaches that width without pressing

FEED

(