FEED and PAUSE Self Test
FEED and PAUSE Self Test

FEED and PAUSE Self Test

Performing this self test resets the printer configuration to the factory default values. Perform a sensor calibration after this self test.
  1. Turn off (
    O
    ) the printer.
  2. Press and hold
    FEED
    +
    PAUSE
    while turning on (
    I
    ) the printer.
  3. Hold
    FEED
    +
    PAUSE
    until the first control panel light turns off.
The printer configuration is reset to the factory default values. No labels print at the end of this test.
To perform the sensor calibration required after this self test. see Calibrating the Ribbon and Media Sensors.