1. ZT400 Series Industrial Printer User Guide
  2. Diagnostics and Troubleshooting
  3. Printer Diagnostics
  4. FEED and PAUSE Self Test
  • ZT400 Series Industrial Printer User Guide
FEED and PAUSE Self Test

FEED and PAUSE Self Test

Performing this self test resets the printer configuration to the factory default values. Perform a sensor calibration after this self test.
  1. Turn off (
    O
    ) the printer.
  2. Press and hold
    FEED
     +
    PAUSE
     while turning on (
    I
    ) the printer.
  3. Hold
    FEED
     +
    PAUSE
     until the first control panel light turns off.
The printer configuration is reset to the factory default values. No labels print at the end of this test.
To perform the sensor calibration required after this self test. see Calibrating the Ribbon and Media Sensors.