Language Setting | Description | |
|---|---|---|
Language | If necessary, change the language that the printer displays. This change affects the words shown on the following:
| |
User menu item: | Main Menu >  SETTINGS Main Menu >  LANGUAGE  The selections for this parameter are displayed in the actual languages to make it easier for you to find one that you are able to read. | |
Accepted values: | ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN, NORWEGIAN, PORTUGUESE, SWEDISH, DANISH, SPANISH 2, DUTCH, FINNISH, CZECH, JAPANESE, KOREAN, ROMANIAN, RUSSIAN, POLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE | |
Related ZPL command(s): | ^KL | |
SGD command used: | display.language | |
Printer web page: | ||
Command Character | The format command prefix is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start of a ZPL/ZPL II format instruction. Set the format command character to match what is used in your label formats. You cannot use the same hex value for the format command prefix, control character, and delimiter characters. The printer must see different characters to work properly. If you are setting the value through the control panel, the printer will skip any value that is already in use. | |
User menu item: | Main Menu > LANGUAGE  | |
Accepted values: | 00 to FF | |
Related ZPL command(s): | ^CC or ~CC | |
SGD command used: | zpl.caret | |
Printer web page: | ||
Control Character | The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II control instruction. Set the control prefix character to match what is used in your label formats. | |
User menu item: | Main Menu > LANGUAGE  | |
Accepted values: | 00 to FF | |
Related ZPL command(s): | ^CT or ~CT | |
SGD command used: | zpl.control_character | |
Printer web page: | ||
Delimiter Character | Set the Delimiter Character Value
The delimiter character is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions. Set the delimiter character to match what is used in your label formats. | |
User menu item: | Main Menu > LANGUAGE  | |
Accepted values: | 00 to FF | |
Related ZPL command(s): | ^CD or ~CD | |
SGD command used: | zpl.delimiter | |
Printer web page: | ||
ZPL Mode | Select the mode that matches what is used in your label formats. This printer accepts label formats written in either ZPL or ZPL II, eliminating the need to rewrite any ZPL formats that already exist. The printer remains in the selected mode until it is changed in one of the ways listed here. | |
User menu item: | Main Menu > LANGUAGE  | |
Accepted values: |
| |
Related ZPL command(s): | ^SZ | |
SGD command used: | zpl.zpl_mode | |
Printer web page: | ||
